Supplementary recapitulative import declaration for a period

A simplified declaration may omit certain details which are mandatory in a standard customs declaration.

Lodge a simplified declaration as follows:

• When you are lodging the declaration in the Customs Clearance Service, choose “Simplified declaration” and the appropriate additional declaration type.
• When you are lodging the declaration via message exchange, the simplified declaration is chosen simply using the additional declaration type.

Under “Parties”, provide

• if you have an SDE authorisation, the number of the authorisation
• declarant, importer, exporter as well as representative, if a representative is used

At declaration header level, provide

• trader reference
• additional declaration type
  • If you have an authorisation granted by the Customs Authorisation Centre, provide one of the following:
    • “C – Simplified customs declaration with regular use”
    • “F – Pre-lodged simplified customs declaration with regular use”
      • You can submit a pre-lodged declaration as soon as you know the MRN of the previous document.
  • If you don’t have an authorisation provide one of the following:
    • ”B – Simplified declaration on occasional basis"
    • ”E – Pre-lodged simplified declaration on occasional basis”.
      • You can submit a pre-lodged declaration as soon as you know the MRN of the previous document.
• mode of transport at the border and nationality of the means of transport
• dispatch country
• destination country
• the location of the goods when the declaration is submitted as well as proposed control location
• container, if the goods are in a container.

At goods item level, provide

• requested procedure, previous procedure and additional procedure
• origin country
• commodity code and goods description as well as details of any restrictions on the goods
  • Provide the required documents for goods subject to restrictions, e.g. the phytosanitary certificate (N851), CHED-PP – the number of the Traces declaration (C085) and the registration number from the Food Authority (5REK)
• packages and kind of packages
• details of previous documents
  • If the previous document is an entry summary declaration, provide the code for the previous document and its reference MRN, as well as the consignment ID.
• additional information and additional documents related to the goods
• gross mass and net mass of the goods
• transaction price
  • Provide the actual value of the goods in the Customs Clearance Service under “Transaction price” or with a message under “Value of the goods item”. 
    • In the simplified declaration, you can provide the value of the goods as an estimate that you can change in the supplementary customs declaration.
      • If you do not have the final value information, you can use the average price of the goods or the computed value of the goods, which is based e.g. on the commercial contract for the goods, on earlier purchases or on the value indicated in the order confirmation. 
    • In declarations for special procedures, always provide the actual value of the goods already in the simplified declaration.
• preference

Please note that if you are applying for a tariff quota with a simplified customs declaration, you can’t apply for another tariff quota with a supplementary customs declaration. Read more about tariff quotas.

Read more about submitting an import declaration in advance.

The supplementary customs declaration is a standard customs declaration where the missing details of the goods imported during the period are provided for customs clearance. The goods covered by the simplified import declarations must be released for the procedure before the supplementary import declaration can be lodged. 

Lodging one supplementary recapitulative customs declaration for several simplified declarations requires that all the simplified declarations contain the following consistent details:

• exporter, i.e. seller 
• term of delivery
• country of dispatch
• mode of transport 
• nationality of the means of transport (may change).

How do I lodge a supplementary customs declaration?

Lodge a supplementary customs declaration as follows:

• When you lodge the declaration in the Customs Clearance Service
  • Select “Supplementary customs declaration”.
  • Select first one MRN that the supplementary customs declaration concerns. In the list that opens, select the MRNs of the simplified declarations for which you wish to lodge a supplementary declaration.
• When you lodge the declaration via message exchange:
  • Provide the additional declaration type “U – supplementary recapitulative declaration of simplified declarations covered by C and F”.
  • At declaration header level, provide as previous documents the MRNs of the simplified customs declarations. As the previous document type, provide ”C512 – SDE - Authorisation to use simplified declaration (Column 7a, Annex A of Delegated Regulation (EU) 2015/2446)”.

The following details are usually required in a standard customs declaration, but they don’t have to be provided in a supplementary customs declaration:

• location of goods  
• identification number of the means of transport.

You can amend details provided in a simplified customs declaration before receiving a decision on release. However, the declaration can’t be amended if Customs has decided to inspect the goods.

With a supplementary customs declaration, you can amend some of the details provided in a simplified declaration (see “ Details that can be amended using a supplementary customs declaration”).

If the amendments to a simplified declaration can’t be made using a supplementary declaration, request amendment of the simplified declaration.

If details provided in a simplified customs declaration can’t be amended, the simplified customs declaration must be invalidated. First, complete a replacement declaration and request invalidation of the incorrect declaration. Also request invalidation of a simplified customs declaration, if the declaration is unnecessary, e.g. if the goods don’t arrive at all.

Read more about amending a customs declaration.

Read more about invalidation.

Always primarily amend the simplified customs declaration. However, if you have amended details that cannot be amended using a supplementary declaration, Customs will reject the supplementary declaration. Amend the incorrect details in the declaration and send the amended customs declaration back to Customs. 

If the details you wish to amend can’t be amended using a supplementary declaration, check if you can amend the supplementary customs declaration. If the declared incorrect details can’t be amended lodge a new replacement standard customs declaration (additional declaration type A) and request invalidation of the customs declaration. Read more about invalidation.

A recapitulative periodic customs declaration can be used for declaring imports of electricity and natural gas by cable and pipeline.

A simplified import declaration is lodged as the declaration that starts the period. If the import doesn’t take place, this declaration must be invalidated. In a simplified import declaration, the details provided for the goods can be estimates.

When the period has ended, lodge one supplementary recapitulative declaration for all the goods transported by cable or pipeline during the period.

In customs declaration concerning cables and pipelines, provide the following details differently:

• mode of transport “7 – Fixed transport installations”
• kind of packages “NE – Unpacked or unpackaged” and number of packages “1” as well as as shipping marks “no marks”.
• net mass “1”
• gross mass “1”

In a simplified customs declaration, provide the previous document “1ZZZ – Other previous document” and as its reference, e.g. “electricity” or “natural gas”.

In a supplementary customs declaration, provide at declaration header level, the MRN of the simplified customs declaration as the previous document. Provide as the previous document type “C512 – SDE  - Authorisation to use simplified declaration (Column 7a, Annex A of Delegated Regulation (EU) 2015/2446)”.

If you are importing electricity or natural gas free of VAT (section 94(1)(2) VAT Act), provide one of the following additional procedure codes in the supplementary customs declaration:

• additional procedure code for electricity “624 – Electricity delivered to the network of a network operator (Section 94(1)(2) VAT Act)”
• additional procedure code for natural gas “625 – Gas delivered through a natural gas system or any network connected to such a system or fed in from a vessel transporting gas into a natural gas system or any upstream pipeline network, as well as heat or cooling energy delivered through heating or cooling networks”

If your business is authorised to use a simplified fallback procedure, where supplementary recapitulative periodic declarations are lodged, you can use e.g. a transport document as the fallback procedure document. The fallback procedure document must contain all the details that are provided in a simplified customs declaration.

During the fallback procedure, you can request release of the goods using the fallback procedure document. However, when the service interruption is over, an electronic customs declaration must be lodged for the goods. The details provided in the electronic simplified customs declaration must be the same as in the fallback procedure document submitted during the service interruption. Submit the without delay when the service interruption is over.

Provide the following details in the electronic customs declaration at declaration header level:

• the additional information code “FIFAL − Fallback procedure” and as its description the acceptance date of the fallback procedure document (format: yyyy.mm.dd)
• the additional information code “FIPER – Length of the aggregation period (W = week, M = month)” and either “W” or “M” as the description.
• the first day of the period as the tax determination date.

There must be a separate fallback procedure document for the goods of every declaration header imported during the fallback procedure, with which the goods will be released for the procedure. The document must be presented primarily to the customs office of placement. If the customs office doesn’t provide customer service, you can send the fallback document to the Electronic Service Centre by email to spake.tuonti(at)tulli.fi. Write “Fallback procedure” in the subject line of the email message.

If you have pre-lodged a simplified customs declaration, and the transport arrives during a service interruption, you will need a fallback procedure document in addition to the MRN. The fallback procedure document may be e.g. a transport document containing the MRN and the details required in a simplified customs declaration.

The details to be provided using the fallback procedure document

The fallback procedure document must be numbered and it must contain the following details:

1. MRN of the entry summary declaration or of the transit declaration containing the safety and security data
2. authorisation number and declarant, if the consignee is not the declarant
3. mode of transport, nationality and identification of the means of transport, name of the company responsible for the transport
4. goods description and quantity
5. consignor and dispatch country
6. destination country, name and address of consignee
7. location of goods and proposed control location
8. date
9. number of the fallback procedure document, e.g. the CMR number
10. length of the period and tax determination date
11. the required additional documents and other declaration-specific details.

If the previous document for the transport is submitted under the fallback procedure simultaneously with the fallback procedure document for import, the same fallback procedure document can be used for providing the safety and security data provided in the arrival notification as well as the details required in a simplified customs declaration. In that case, the fallback procedure document must contain the additional information required by both the notification and the declaration. Read more about providing the safety and security data under the fallback procedure.